h1

Dahon Rear Rack

Saturday May 1, 2010

Dahon D7HG - New RackHaving recently invested in some panniers and a rack bag for my ‘epic’ ride across Britain, I thought that I should really maximise the use out of them (as they weren’t cheap!).

I’ve already fitted a Topeak Super Tourist DX Rear Rack to the Trek so I knew the quality of the product, and it was back to Wiggle’s website to order a second one, this time for the Dahon D7HG.

Removal of the Dahon rack was pretty straight-forward with the use of a 4mm allen key and a Philips head screwdriver to remove the mudguard attachment.

Once removed, holding the Topeak rack in place I realised the extent of the size difference.  The Dahon rack is obviously designed for the bike, whereas the Topeak rack is designed for larger wheel bikes and therefore sits quite high off the Dahon’s wheel – the underneath of the rack is about 4.5″ from the top of the tyre.  Due to this, the rear mudguard fixings wouldn’t reach the new rack and therefore could not be secured.  As a result I had to remove the mudguard completely.  To remove the bottom allen bolt from the mudguard, I had to deflate the rear tyre to enable the allen key space to engage with the bold – a far quicker (and easier) method than having to remove the entire rear wheel to gain access.

Dahon D7HG - ClearanceFitting the rack was quick and simple.  All the necessary fixtures are included with the rack and the only tool required is a 5mm allen key.  The rack uses the same fixing points as the original Dahon rack but I did select the lower fixing points on the back of the frame (near the wheel axle) to lower the rack slightly, if only by <1″.

The only thing left to do now is buy some new bolts so that I can fit my Cateye rear light fixture onto the rack.

I think the bike looks pretty good now.  Removal of the rear mudguard has improved the appearance of the bike – but the addition of the new rack should still provide some spray protection as it has a solid base plate.  The rack provides a good grab ‘handle’ to carry the bike when folded, which I think is a slight improvement on the Dahon rack.  The only slight negative to the rack is (perhaps) a slight increase in the weight of the bike – but it’s still not too bad.

A good modification to a great bike!

Click here to view larger photos on Flickr, or click on the individual images within this post.

Dahon - Folded

Advertisements

4 comments

  1. That’s strange! I just tried to fit rear rack from my touring bike to Dahon becuase the small Dahon rack it’s no more fit my needs.
    I have found some “problems” which I need to solve it but I hope finally it will fit …


  2. 🙂

    I think the standard Dahon rack is okay, but it is limited in what it will carry/hold.


  3. Does the bike still fit in its bag easily?


    • Hi, my bike doesn’t have a bag, it didn’t come with one. 🙂



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: